100 / 1000M Fiber Optic Media Converters support flow control, 1536
byte Ethernet packet
1.Transmission:10/100/1000M
2.Fiber Type: SM, Single Fiber
10/100/1000M Gigabit Optical Fiber Media Converter
CY Series Gigabit Fiber Media Converter can convert
Optical-Electric Ethernet signals between 10/100/1000M UTP
interface (TX) and 1000M optical fiber interface (FX). The
traditional 10/100/1000M gigabit Ethernet can be extended to the
distance of 100km through optical fiber link. The performance and
quality of the products are excellent because of adopting latest
Gigabit IC from USA and Taiwan. 6 Group LED indicated lights could
fully monitor the working conditions of converters. It is easy for
users to observe and diagnose the failure of converters. OFS Series
Gigabit Converters could be used alone; but Converter Card should
be inserted to 16 slots RACK supplied by OFS Crop. which is
suitable for the use of Network Centre.
Main features
* The transmission of a channel signals can be completed by single
fiber. It has doubled in quantity of fiber data transmission
compared with twin fiber.
* Auto negotiation function allows UTP ports to auto select
10/100/1000M and Full Duplex or Half Duplex.
* The UTP port supports the connection of MDI/MDI-X auto crossover.
* Multimode Fiber: the max distance up to 224m/ 550m
Singlemode Fiber: the max distance up to 100km
* Supporting the max 1536 byte Ethernet packet
* Supporting flow control
* Adopting internal power supply
Technical Specifications
***Operating standards:
IEEE802.3 10Base-T Ethernet,
IEEE802.3u 100Base-TX/FX Fast Ethernet,
IEEE802.3ab 1000Base-T ,
IEEE802.3z 1000Base-SX/LX Gigabit
* Wavelength:850nm/1310nm/1550nm
* MAC address table: 4K
* Data Buffer: 256K
* Connector: UTP: RJ-45, 10/100/1000Mbps; Fiber: SC, 1000Mbps
* Cable:
UTP cable: Cat 5e or Cat 6 (the max distance up to 100m)
Fiber: multimode : 50/125, 62.5/125μm (the max distance up to
550/224m)
singlemode : 8.3/125, 8.7/125, 9/125μm (the max distance up to
120km)
* Connector: FC/PC or SC or SFP port
* Flow control
Full Duplex: IEEE802.3x
Half Duplex: back pressure.
* Conversion mode: Medium conversion
* Delay: <10μs
* Bit error rate: <1/1000000000
* MTBF: 80, 000 hours
* LED:
POWER (power),
FX LINK (fiber link action),
TP LINK1000 (twisted pair connection 1000M)
TP LINK100 (twisted pair connection 100M),
TP ACT (twisted pair packet forwarding action)
FDX (Ethernet interface mode indicator ON, Full duplex/ OFF, Half
duplex)
* Power Requirement:
Input : AC 170 ~ 240V or DC -36V-72V
Output: DC 5V 2A
* Power consumption: 5W
* Ambient temperature:0 ~ +50
* Storage temperature:-20 ~ +70
* Humidity:5% ~ 90%
* Dimensions: Internal power: 30×110×140mm
External power: 26×70×93mm
Fiber Information
Model | Connector | Fiber type | Max distance | Wavelength | TX power | Sensitivity | Link Budget |
CY-GM | SC | Multimode | 224/ 550m | 850nm | -11~-3dBm | -18dBm | 7dBm |
CY -GS-20 | SC | Singlemode | 20km | 1310nm | -10~-3dBm | -21dBm | 11dBm |
CY -GS-40 | SC | Singlemode | 40km | 1310nm | -4~0dBm | -25dBm | 21dBm |
CY -GS-60 | SC | Singlemode | 60km | 1310nm | 0~3dBm | -26dBm | 26dBm |
CY -GS-80 | SC | Singlemode | 80km | 1550nm | -2~2dBm | -26dBm | 24dBm |
CY -GS-100 | SC | Singlemode | 100km | 1550nm | 1~3dBm | -27dBm | 28dBm |
CY-GW01/02-20 | SC | Singlefiber | 20km | 1310/1550nm | -11~-5dBm | -23dBm | 12dBm |
CY-GW01/02-40 | SC | Singlefiber | 40km | 1310/1550nm | -5/-8~0dBm | -26dBm | 21/18dBm |
CY-GW01/02-60 | SC | Singlefiber | 60km | 1310/1550nm | 0/-5~2dBm | -26dBm | 26/21dBm |
CY-GW01/02-80 | SC | Singlefiber | 80km | 1490/1550nm | -2~3dBm | -26dBm | 24dBm |
CY-GAS-1 | SFP | MM/SM/WDM | 0~80KM | 850nm/1310nm/1550nm |
|
|
|
Application:
1.Apply to ready to rise to 10M extended enterprise network
bandwidth 100M
2. Apply to images, voice and other multimedia data on an
integrated transport network point
3. Applies to the computer signal transmission in need of the
occasion widely used for computer data transmission network to meet
a variety of business needs
4. Apply to the campus broadband network
